determine the output voltage for a transformer that has 96 turns in its primary and 492 turns in its secondary. The input voltage is 12.0 volts….

determine the output voltage for a transformer that has 96 turns in its primary and 492 turns in its secondary. The input voltage is 12.0 volts. Report your answer to 2 decimal places.

Determine the output voltage for a transformer that has 96 turns in its primary and 492 turns in itssecondary. The input voltage is 12.0 volts. Report your answer to 2 decimal places.We have the…

A 400 g ball swings in a vertical circle at the end of a 1.5 m-long string. When the ball is at the bottom of the circle, the tension in the string…

A 400 g ball swings in a vertical circle at the end of a 1.5 m-long string. When the ball is at the bottom of the circle, the tension in the string is 11 N. What is the speed of the ball at that point?

Hi, Homelessness is a public health issue and it can have many negative impacts on a local community.

Hi,

Homelessness is a public health issue and it can have many negative impacts on a local community. What aspects of homelessness have the most influence beyond the local community and have impacts for the global community? Think in terms of things like lifestyle, population dynamics, disease, climate change, disaster response, etc.

And With a focus on the entire planet, why does homelessness topic matter?

Kw , the equilibrium constant for the ionization of water by the equation below, is 1.0 x 10 -14 . What does that mean when we are considering pure

OH-

Select one:

a. More ions exist than water molecules.

b. The majority of the molecules present are in the form of H2O.

c. The amount of water is the same as the amount of the ions present.

d. There will always be more hydronium ions present than water at equilibrium.

A mass M is located a distance D up aninclined plane (inclined by an angle theta).

A mass M is located a distance D up an inclined plane (inclined by an angle theta). The mass is at rest, but it is experiencing the force of gravity and a frictional force opposing the motion of the block down the inclined plane. The normal force is a force perpendicular to the inclined plane equal in magnitude to the component of the block’s weight that is also perpendicular to the inclined plane.  A frictional force is proportional to the normal force. Complete the diagram by drawing a vector diagram showing each force. Provide equations that represent the net forces along the direction of the plane and perpendicular to the plane.

Can you help me I am really stuck. Thank you for your help

Traverse each bridge do not recross any bridge return to the starting point Euler circuit: return to the starting point by traveling each edge of the…

Traverse each bridge do not recross any bridge return to the starting point Euler circuit: return to the starting point by traveling each edge of the graph once and only once. The distance between two nodes is defined as the number of edges along the shortest path connecting them. If the two nodes are disconnected, the distance is infinity. Is there a solution to the Konigsberg bridge walking problem?

Rotting fruit would be a liquid changes to a Rusting on a car would be a Wind erosion of rocks would be a A copper penny turning dark would be a Fill…

please fill these gap, am not sure of the correct answer.

Rotting fruit would be aliquid changes to aRusting on a car would be aWind erosion of rocks would be aA copper penny turning dark would be aFill in the blanks with an appropriate term :physical change is when the sample changes from oneAnother specific example of a physical change would be|Classify each of the following as either a physical or chemical change .or aPhysical changes involve changes in appearance but not in composition . A common example of aChemical changes involve a change in composition . Two specific examples of chemical changes are :change .change.change .to another such as when achange .and

The temperatures TC of the cold reservoirs and the temperatures TH of the hot reservoirs for four Carnot heat engines are engine 1: TC = 400K and TH…

1.

The temperatures TC of the cold reservoirs and the temperatures TH of the hot reservoirs for four Carnot heat engines are

engine 1: TC = 400K and TH = 500K

engine 2: TC = 500K and TH = 600K

engine 3: TC = 400K and TH = 600K

engine 4: TC = 600K and TH = 800K

Rank these engines according to their efficiencies, least to greatest.

a. 1, 2, 3, 4

b. 1 and 2 tie, then 3 and 4 tie

c. 2, 1, 3, 4

d. 1, 2, 4, 3

e. 2, 1, 4, 3

2.

An object hangs from a spring balance. The balance indicates 30N in air and 20N when the object is submerged in water. What does the balance indicate when the object is submersed in a liquid with a density that is half that of water?

a. 20N

b. 25N

c. 30N

d. 35N

e. 40N

3.

Water flows through a cylindrical pipe of varying cross section. The velocity is 3.0m/s at a point where the pipe diameter is 1.0 cm. At a point where the pipe diameter is 3.0 cm, the velocity is:

a. 9m/s

b. 3m/s

c. 1m/s

d. 0.33m/s

e. 0.11m/s

4.

A Carnot engine runs between a hot reservoir at Th and a cold reservoir at Tc. If one of the temperatures is either increased or decreased by 3.5 K, which of the following changes would increase the efficiency by the greatest amount?

a. increasing Th

b. increasing Tc

c. decreasing Th

d. decreasing Tc

Block 1, of mass = 0.650 , is connected over an ideal (massless and frictionless) pulley to block 2, of mass , as shown.

Block 1, of mass = 0.650 , is connected over an ideal (massless and frictionless) pulley to block 2, of mass , as shown. Assume that the blocks accelerate as shown with an acceleration of magnitude = 0.550 and that the coefficient of kinetic friction between block 2 and the plane is = 0.300.

A motorboat accelerates uniformly from a velocity of 6.3 m/s to the west to a velocity of 1.9 m/s to the west. If its acceleration was 2.

A motorboat accelerates uniformly from a velocity of 6.3 m/s to the west to a velocity of 1.9 m/s to the west. If its acceleration was 2.6 m/s2 to the east, how far did it travel during the acceleration?